Three Tips to Save Water and Money at Home

Water. It meets the most basic of needs, necessary for survival by animals (including humans) and plants alike.

And we use a lot of it. Some experts estimate that the average U.S. residents uses more about 70 gallons of water per person, 280 gallons per day per family of four. At that rate, a typical neighborhood is using an Olympic sized swimming pool of water everyday, just to brush their teeth, shower, cook, and flush the toilet! When you imagine how many neighborhoods there are in your city, each drawing that amount of water, it's easy to visualize the strain this puts on your local water supply.

Here are a few tips for how you can do your part to a little less water around your house and leave it a little more of it in your local lake or river for the benefit of nature and wildlife.

Tip #1: Check for Leaks
The worst way to use more water than you need to is to waste it. When your pipes leak, when your sink drips, and when you toilet runs, that's water and money going down the drain with literally nothing to show for it.

Here's a quick and easy way to see if you have any leaky plumbing in your home. You can involve the kids. They'll have fun playing «leak detective.»

First, find your water meter. It's probably on the corner of the house closest to the street. At the start of the test, check the meter and write down the number of gallons you have used. Then, go 30 minutes without using any water. Don't flush the toilet. Don't brush your teeth. Don't take a shower. Don't wash your hands. If this second step is hard, think of it as a reminder how important water is.

After 30 minutes has passed, return to the meter and read the numbers again. Where are the numbers now? If they haven't changed, no leaks. If they have changed, now it's time to play «leak detective» -- where are the leaks? Start by going around the house and turning off the water to all the toilets. Then wait another 30 minutes. If the numbers don't budget this time, then you have you found your culprit – a leaky toilet.

If the water numbers still go up after you shut off water to the toilets, then it's probably time to call a plumber.

Tip #2: Install a new showerhead
Once you've found and fixed those pesky leaks, you can turn your attention to the fixtures that just use more water than they need to to get the job done. You've probably been thinking about remodeling that bathroom or kitchen anyway, haven't you?

When you arrive at Home Expo Mart, look for EPA's new WaterSense label on the showerheads and faucets. Buy these with confidence that they will provide you with a comfortable, luxurious shower – without squandering life's most precious resource. The little savings each day add up to something important. By switching to an EPA Watersense showerhead, a household with children can save an average of 2300 gallons of water per year.

Tip #3: Install a new toilet
Forget what you think you know about water efficient toilets. Toilets that carry the EPA Watersense label work great AND use less water than the older models. In fact, by replacing an older toilet with a new WaterSense toilet, your family can shave almost 5% off your total water use (and bill) per year.

By following these three simple steps, you can save money and save water. It's a great feeling!

Article Source: http://www.diyarticlelibrary.com

Are you raising a family in the Washington DC metro area? Are you interested in tips about government services and other useful information for moms like you? If yes, then check out the Metro DC Mom Blog. This article was placed in this directory by the environmental communications company Water Words That Work, LLC.

Please Rate this Article

5 out of 54 out of 53 out of 52 out of 51 out of 5 

Not yet Rated